1. Introduction
This PLA Plastic Film is a kind of biodegradable film, which is made of bioplastics as the main raw material, by adding modifier and adopting relevant technology.
It is completely biodegradable and meets the certification of ASTM D2578 and ASTM D374.
2. Technical Data Sheet
| Item | Unit | Test Method | Value |
| Thickness | μm | ASTM D374 | 45 |
| Tensile strength | MD | MPa | ASTM D882 | 96 |
| TD | 128 |
| Elongation | MD | % | ASTM D882 | 50 |
| TD | 88 |
| Heat Shrinkage | MD | % | 100℃/10S | 3.2 |
| TD | 78 |
| Haze | % | ASTM D1003 | 2.9 |
| Transmittance | % | | 93.3 |
| Gloss | % | GB/T 8807(45°) | 77 |
| C.O.F(IN/OUT) | μS/μK | ASTM D1894E | 0.51/0.41 |
| Wet Tension | mN/m | ASTM D2578 | 38 |
| Seaming Strength | N/15mm | | 4.61 |
3. Features
Environmental-friendly;
Lower oxygen omission;
compostable;
Excellent gauge and shrinkage uniformity;
4. Used Primary Markets
- Pharmaceuticals and Horticulture
- Confectionery
- Writing Instruments
- Dairy Products
- Consumer Goods
- Spirits
- Agro Products
- Oil & Lubricants and many more...
5. Advantages of PLA
One of the major advantages of PLA is its biodegradable nature and the sustainable process by which it is made, making it the environmentally friendly choice of plastic. Under the right circumstances, PLA can break down into its natural elements in less than a month in contrast to the centuries it will take for traditional plastics to decompose.
The process by which PLA Is made is also more environment-friendly.
PLA is a thermoplastic, meaning it will turn into a liquid in its melting point of 150 to 160 Celsius. A nifty feature of thermoplastics is that they can be heated, set upon cooling, and reheated again to form other shapes without any degradation. In contrast, a thermosetting plastic (such as epoxy or melamine) can only be heated and molded once, but the resulting product can no longer be reheated as it will just burn. This property of PLA makes it a desirable material for recycling.
PLA can be broken down to its original monomers by a thermal de-polymerization process or by hydrolysis. The resulting monomer solution can be purified and used for subsequent PLA production without any loss of quality. Should a material made from PLA be incinerated, no toxic fumes will be generated.
6. FAQ
1) Q: Do you accept OEM?
A: Yes, we do.
2) Q: What's your delivery time?
A: It’s according to the quantity of the order. Normally it is between 5 and 20 days.
3) Q: What's your production capacity?
A: About 4000 tons per month.
4) Q: What's your payment term?
A: We accept T/T, L/C, O/A, Western Union, or customized if it is acceptable.
5) Q: Do you provide free sample? And how many days it will take?
A: Samples for testing are available and free. The freight for sample delivery is at receivers's side. But to be refunded by deducting from the right coming order automatically
PLA Shrink film(PLA-1011) (2).pdf
